Husqvarna Viking Service Manual


Husqvarna Viking Service Manual models 0210 to  6460 Download

This comprehensive technical service manual has been written to meet the ever increasing requests for knowledge by Viking technicians. Please view the videos page for more Husqvarna Viking troubleshooting service and repair tips.


The manual endeavors 184 pages to thoroughly cover the sections listed below and more:
Service manual

  • setting tools and gauges
  • removing machine covers
  • inspecting parts for damage
  • checking noise level and machine speed
  • electrical checks and adjustments for the 6570
  • service checks and adjustments
  • component removals and installation
  • component repair
  • electrical wiring of terminal blocks and foot controls
  • and more.



Applies to classes:
8, 19S, 19A, 19E, 21, 21A, 21E, 49E, 51, 51E, 71, 71E, 2000       
Applies to models:
0210, 1010, 1310, 3010, 3310, 4010, 4310, 5010, 5210, 6010, 6310, 6320
Wiring diagrams for models:
1020, 1030, 1040, 1060, 3020, 3220, 3230, 3240, 3260, 4020, 4030, 5220, 5230, 5430, 5530, 5540, 5560, 6020, 6030, 6170, 6260, 6270, 6360, 6370, 6430, 6440, 6460
Early models:  CL19, CL20


Download

23 comments:

  1. i call out viking appliance repair service and they said they will send someone out same day. The technician called me up as scheduled and was able to repair my appliance so I didn't lose any of my time waiting for another service,thank a lot to viking fast service which i really appreciate!
    thank you!for uploading such an nice video.

    ReplyDelete
  2. Shifted cam gear (Model 6030) and ended up with the zig-zag out of sync, i.e. needle doesn't reach it outermost sideways position until it's well past the fabric and down in the bottom position = makes a sideways sliding through the fabric. The cam lobes lift about 45 degrees too late.

    Cam ridges are exactly in line with the ridges on the pattern cam ridges, so the cam should be OK.


    Is this described in your service manual? Any idea how to adjust? (other than trying to adjust the cam followers)

    ReplyDelete
  3. Can I get a repair manual for the Designer 1?

    ReplyDelete
    Replies
    1. did you ever find the repair manual for the D1? I'm now looking for one. thanks,

      ss
      ssarge2@gmail.com

      Delete
  4. This comment has been removed by the author.

    ReplyDelete
  5. Thank you for uploading the service manual. I was given a Viking 6370 that would not engage. Using the service manual I was able to remove the covers and determine that the set screws had stripped the drive shaft, the v-belt pulleys were installed incorrectly, and the stop for the bobbin mechanism was installed incorrectly. What a mess! I will probably end up giving it to a repair shop for parts.

    ReplyDelete
  6. i need a viking rose tension knob repair info

    ReplyDelete
    Replies
    1. What is wrong with your tension unit. I'll see what i can put together.

      Delete
  7. looking for instructions on replacing the touch pad circuit board on a Designer 1 original floppy version machine.

    ssarge@owc.net

    ReplyDelete
  8. Any ideas on an easy repair for a button that won't work on the Designer 1 original floppy version machine???? All of a sudden the "Fix" button won't work!!
    Please help!!

    ReplyDelete
  9. so I'm confused, does this download include instructions on the Swedish model 6030 -> how to thread the bobble & and such?

    ReplyDelete
  10. Do you have a manual for the 6570? Thank you.

    ReplyDelete
    Replies
    1. You can get it at http://www.sewingnz.com/husqvarna-viking-sle-6570-sewing-machine-instruction-manual/

      Delete
    2. For more detailed help go to: http://support.sewingnz.com/forums/forum/sewing-machine-support/husqvarna-viking-sewing-machines/husqvarna-viking-sle-6570/

      Delete
  11. I'm trying to find a similar Service Manual for a Husqvarna SLE6570. In the Service Manual above, I couldn't find anything related to lubrification of the machine. Is that documented in another manual ?

    ReplyDelete
  12. Just got a 1961 CL 19. Earlier model. Can not seem to find bobbins or parts at all. Does anyone know where I could find it.
    Thanks

    ReplyDelete
  13. Just got a 1961 CL 19. Earlier model. Can not seem to find bobbins or parts at all. Does anyone know where I could find it.
    Thanks

    ReplyDelete
  14. I just paid $10 for the service manual, but you never let me download manual. Are you a scam or fraud? I'm glad I used PayPal. I will adventually get my money back.

    ReplyDelete
  15. Do you have a manual for 6460....machine will only see backwards....small button will not free up despite on blaster and penetrating oil.....help....

    ReplyDelete
  16. need a service Manual for husqvarna sapphire 850 Service manual have problem with the machine and the nearest service centre is 1000 kms away somebody help me please

    ReplyDelete
  17. I need a service Manual for Husqvarna 2000 model 6460.
    Thanks

    ReplyDelete
  18. I have been given a Husqvarna 5530 but the back plate that hold the spools is broken off, can i get this as a spare part?

    ReplyDelete
  19. I changed the hand wheel on a viking 980, now all it will do is a straight stitch. What do I have to do to get all my stiches back?

    ReplyDelete